Sandwich Panel Board Sliding Door Video
Industrial sliding doors, double or multiple leafs. Sliding doors are available in a variety of forms, sizes, and door panels. It can be applied to small holes and can be applied to special openings with super wide and super high. Therefore, the application range is relatively wide, such as small workshops, warehouses...
Sandwich Panel Board Sliding Door Video
1. The main structure of the door：The sliding door can be manually opened or by electric motor. The structure of the door is simple, the opening direction, the number of door fans is flexible, and the small door can be conveniently added to facilitate the passage of personnel. Strong wind resistance and durability.
2. The load-bearing method has two methods:
(1) Upper bearing: The upper orbit bears the weight,lower rail to the guiding role,the door frame needs to be very strong;
(2) lower bearing: The lower rail bears the weight, the upper rail guides;
3. Panel material: small door(less than 10m width), steel frame with buckle edge (high sealing) special edging door frame, 50mm, 75mm, 10mm foam door panel, polyurethane foam door panel or rock wool door panel, steel plate thickness 0.5mm, the middle of the door panel according to the specific size Increase the resistance to wind.
4. Lighting window: Can choose tempered glass, sunlight board, PC endurance board, laminated glass and its transparent materials.
Only one pair of bottom roller wheels is required per gate or door.
Bottom rollers are built into the frame of the door or gate and are designed to carry the entire weight of the door rolling on floor track. A top guide system is used to prevent the door from tipping over at the top.
Used for the following applications:
The wall or ceiling is not strong enough to support the weight of the door.
There is a limited amount of room for hardware at the top of the door.
A header does not exist across the top of the opening. Typically true for sliding gate applications.
Bottom rolling hardware can support much heavier doors than overhead style box and flat track hardware. Up to 128,000 lb capacity.
Contact us for your next project and we’ll fit your new steel structure building with the suitable door!