Embedded anchor bolts

If the player does not load, open the video on YouTube

Duration: 3 min 36 s

This video introduces Embedded anchor bolts, a JDCC solution in the Steel Structural Parts category. The video runs for approximately 3 min 36 s. It helps project teams review the product before requesting technical information or pricing.

The video focuses on the fabrication and application of steel sections, beams, columns and other structural components.

Key features: While there are many types of anchor bolts (consisting of designs that are mostly proprietary to the manufacturing companies), there are two main types of concrete anchor bolts: post-installed anchors and cast-in-place anchors...

Product overview: While there are many types of anchor bolts (consisting of designs that are mostly proprietary to the manufacturing companies), there are two main types of concrete anchor bolts: post-installed anchors and cast-in-place anchors. The cast-in-place anchors are non-proprietary and are the simplest type of anchor bolts. As the name implies, these anchors are cast in the wet concrete before it sets. Most designs consist of a standard bolt with a hexagonal head (hex head bolt), though there are other designs such as “hooked” J bolts and L bolts. Cast-in-pace anchors are very strong, and can be used in most anchor applications; but they are also difficult to cast. Cast-in-place anchors are recommended when the loads require large embedment lengths and high tensile strength. Once the concrete has been poured and set, you’ll have to use post-installed anchors. This type of an anchor is installed.

Review the video and compare Embedded anchor bolts with the requirements of your project. JDCC can prepare a technical proposal covering spans, loads, materials, finishes, supply scope and fabrication schedule.

View product details